Buyer’s Handouts

Siding: Look for dents or buckling

Foundations: Look for cracks or water seepage

Exterior Brick: Look for cracked bricks or mortar pulling away from bricks

Insulation: Look for condition, adequate rating for climate

Doors and Windows: Look for loose or tight fits, condition of locks, condition
of weatherstripping

Roof: Look for age, conditions of flashing, pooling water, buckled shingles,
or loose gutters and downspouts

Ceilings, walls, and moldings: Look for loose pieces, drywall that is pulling
away

Porch/Deck: Loose railings or step, rot

Electrical: Look for condition of fuse box/circuit breakers, number of outlets
in each room

Plumbing: Look for poor water pressure, banging pipes, rust spots or corrosion
that indicate leaks, sufficient insulation

Water Heater: Look for age, size adequate for house, speed of recovery,
energy rating

Furnace/Air Conditioning: Look for age, energy rating; Furnaces are rated
by annual fuel utilization efficiency; the higher the rating, the lower your
fuel costs. However, other factors such as payback period and other operating
costs, such as electricity to operate motors.

Garage: Look for exterior in good repair; condition of floor—cracks,
stains, etc.; condition of door mechanism

Basement: Look for water leakage, musty smell

Attic: Look for adequate ventilation, water leaks from roof

Septic Tanks (if applicable): Adequate absorption field capacity for the
percolation rate in your area and the size of your family

Driveways/Sidewalks: Look for cracks, heaving pavement, crumbling near edges,
stains